Kompak-2CPHL has been derived from the Kompak-2CPH
model, with addition of APTM's PharmaLift, an unique lifting
system, IP65 and sanitary design to current GMPs.
This model was the first in the Kompak-2 series equipped with
full, electronic process controls.
is the typical machine for APIs ( Active Pharmaceutical Ingredients)
that present a certain risk of explosion in ultra-fine, dust
The Kompak-2CPH series is intrinsically safe and can process
organic compounds that present high risk of ultra-fine dust
explosion. These products are class St2 or higher, according
to dusts ignition and explosion classification. They typically
develop, in case of explosion, an internal pressure of about
9 barg with very fast increase and propagation speeds, that
limit the utilization of explosion-relief devices.
explosive powders can be micronised with intrinsically safe
systems, able to resist dust explosion, such as SuperJet Kompak-2CPH
series that is designed for 10-bar pressure shock resistance
and hydraulically tested at 16 bar, according to the most restrictive
norms for pressure vessels.
Other design pressures and testing conditions up to 32-bar have
been are used for special applications.
since 1989, this machine was subject to continuous evolution
in terms of versatility and compactness. It has been manufactured
in several, different versions during the last decade, the different
construction versions being customized and optimized for several
classes of APIs.
Kompak-2CPH features sanitary, USDA-accepted design, in line
with the current Good Manufacturing Practice norms worldwide.
All components are inspected and certified by local authorities.
It is equipped with JM2 SuperJet microniser that has replaceable
nozzle rings with optimized grinding angles for different products
or range of products. The microniser disassembles in more parts,
without recessed surfaces, for perfect cleaning of components
and fast changeover, without risk of cross-contamination.
The modular design allows customization and interchangeability
of different components such as the product feeding system,
the microniser, the product collecting bin and a wide choice
of ( optional) process controls.
The process equipment is made
of stainless steel AISI316 (AISI316L) with hand-polished, pharmaceutical,
mirror finish of product contact parts at 400-600 grit Ra 0.15-0.25µm.
Materials, filters and roughness certificates are routinely
compactness of SuperJet design, pressure-resistant constructions
result heavy, with several components that are difficult to
manage by hand; the parts of the dust separator and of the collecting
bin must handled by hoists, lifting columns and trolleys.
SuperJet Kompak-2CPHL features APTM's PharmaLift, an unique
lifting system, sanitary design to GMPs.
It should be noted that PharmaLift is totally enclosed, IP65
class and features three telescopic-shell, supporting and active
lifting columns that are SELF-STANDING, without any connection
to the ceiling.
is also used for non-pharmaceutical applications, being customized
for construction materials, wear-resistant linings and finishing
to product and customer's specifications.