/ SuperJet -Bottom discharge
/ Kompak series
Kompak-1 is the typical machine for laboratory and R&D applications.
since 1988, this machine was repeatedly improved in terms of
versatility and compactness.
It is offered with two construction models: bench-top ( K1BPT),
and self-standing ( K1BP side photo).
The modular design allows customization and interchangeability
of different components such as the product feeding system,
the microniser, the product collecting bin and a wide choice
of ( optional) process controls.
All versions and construction models feature the following components:
microniser with direct collection of the product from the
grinding chamber, without risk of fiber contamination. It
has a nozzle ring with optimized grinding angles, a horizontal
venturi feeding system that avoids metal contamination and
built-in, static classifying system that assures very narrow,
particle size distribution
Twin-shaft feeder, volumetric type, with concave-profile,
self-cleaning, screws, able to break the agglomerates and
to assure an accurate feeding of poor flowing products, for
the whole batch.
The feedrate is controlled by a stepless, mechanical, speed
High-efficiency, dust separator combining inertial and static
effects. It is equipped with a membrane filter cartridge,
reverse-pulse, automatic cleaning and final, safety HEPA that
exhausts breathing air quality to the atmosphere.
Standard controls, integrated in the front panel, include
process pressure regulators, pressure gages and differential
gages to monitor the filters.
stainless steel construction, bright finish, with all product
contact parts made of AISI316L, hand polished to pharmaceutical,
mirror finish 360-400 grit, Ra 0.15-0.25µm
With this modular design, all versions can be equipped with the
- automatic controls
and sound alarm that monitor continuously the factory air supply
and the process lines and stop the operation in case of failure
electronic pressure controls that monitor the microniser with
proportional pressure regulators, specifically dimentioned for
very quick response and steady operation
- synoptic and
LCD-alarm display with fault messages in plain english, to signal
pressure drops on the microniser lines and across the filters
- electronic motor
controller allowing stepless regulation of feed speeds across
the specified range and features current limiting to prevent overloading
air filters for each process line, USDA-approved and certified
- batch validation
equipment including 4-20mA loop signals from pressure transducers
and process recorder to document each event and alarm.
- vacuum compensation
system that avoids environment contamination in case of blow-backs.
internal linings include PTFE and hard-metal alloys, etc.
SuperJet Micronisers can be customized according to the purchase
and the product specification.
0.2 - 1.5 kgs/hr
Air consumption @ 7 barg
800 Nlt/min (28scfm)
Compressed air supply
6-10 barg (85-145 psi)
Power supply 220/240V
045 kW (0.6 HP)
Shipping: 190 kgs
updated 07-Oct-2002. Copyright
� 2002 APTM SA Switzerland. All rights reserved