Path: Micronisers
/ SuperJet -Bottom discharge
/ Kompak series |
SuperJet microniser
Kompak-1 is the typical machine for laboratory and R&D applications.
In production
since 1988, this machine was repeatedly improved in terms of
versatility and compactness.
It is offered with two construction models: self-standing (
K1BP) and bench-top ( K1BT
side photo).
The modular design allows customization and interchangeability
of different components such as the product feeding system,
the microniser, the product collecting bin and a wide choice
of ( optional) process controls.
BASIC MACHINE
All versions and construction models feature the following components:
-
SuperJet
microniser with direct collection of the product from the
grinding chamber, without risk of fiber contamination. It
has a nozzle ring with optimized grinding angles, a horizontal
venturi feeding system that avoids metal contamination and
built-in, static classifying system that assures very narrow,
particle size distribution
-
Twin-shaft feeder, volumetric type, with concave-profile,
self-cleaning, screws, able to break the agglomerates and
to assure an accurate feeding of poor flowing products, for
the whole batch.
The feedrate is controlled by a stepless, mechanical, speed
variator.
-
High-efficiency, dust separator combining inertial and static
effects. It is equipped with a membrane filter cartridge,
reverse-pulse, automatic cleaning and final, safety HEPA that
exhausts breathing air quality to the atmosphere.
-
Standard controls, integrated in the front panel, include
process pressure regulators, pressure gages and differential
gages to monitor the filters.
-
Full
stainless steel construction, bright finish, with all product
contact parts made of AISI316L, hand polished to pharmaceutical,
mirror finish 360-400 grit, Ra 0.15-0.25µm
|
|
OPTIONS
With this modular design, all versions can be equipped with the
following options:
- automatic controls
and sound alarm that monitor continuously the factory air supply
and the process lines and stop the operation in case of failure
- high-precision,
electronic pressure controls that monitor the microniser with
proportional pressure regulators, specifically dimentioned for
very quick response and steady operation
- synoptic and
LCD-alarm display with fault messages in plain english, to signal
pressure drops on the microniser lines and across the filters
- electronic motor
controller allowing stepless regulation of feed speeds across
the specified range and features current limiting to prevent overloading
- sterilizing
air filters for each process line, USDA-approved and certified
- batch validation
equipment including 4-20mA loop signals from pressure transducers
and process recorder to document each event and alarm.
- vacuum compensation
system that avoids environment contamination in case of blow-backs.
- replaceable
internal linings include PTFE and hard-metal alloys, etc.
All
SuperJet Micronisers can be customized according to the purchase
and the product specification.
|
SuperJet
Microniser |
Kompak-1BPT
|
Nominal size |
4-inch (100mm)
|
Expected output |
0.2 - 1.5 kgs/hr
|
Air consumption @ 7 barg |
800 Nlt/min (28scfm)
|
Compressed air supply |
6-10 barg (85-145 psi)
|
Power supply 220/240V |
045 kW (0.6 HP)
|
Dimensions (effective) |
900x790x750(H) mm
|
Shipping: 90 kgs |
1.0x1.0x1.2(H) mt
|
|
Last
updated 07-Oct-2002. Copyright
� 2002 APTM SA Switzerland. All rights reserved
|